**Includes Tune-up #1 & #2:**

- Inspect bike components and provide advice on their condition and serviceability.
- Adjust front and rear shifting.
- Adjust front and rear brakes.
- Check the wheelsets for trueness and make minor adjustments if necessary.
- Inspect control cables and lubricate as needed.
- Check the condition of the chain, provide advice, and clean and lubricate it.
- Examine tires, offer recommendations, and inflate them to the suggested pressures.
- Lightly clean and wipe down the bike.
- Conduct a safety check of all hardware.
- Replace reflectors, cable end crimps, and valve caps at no extra charge.
- Adjust the front and rear wheel hubs and bearings.
- Adjust the bottom bracket bearings, replacing them if necessary.
- Adjust the steering headset bearings.
- Check the derailleur hanger alignment and correct it as needed.

**Plus!**

- Entire bike stripped, cleaned, and reassembled.
- All bearings serviced.
- Ultrasonic drivetrain deep cleaning and service.

**All labor for installing or replacing new parts will incur an additional charge of $12.50, plus the cost of the parts.**

Call ahead for service scheduling. (989) 821-0280